.config/dunst/dunstrc

@@ -1,416 +0,0 @@
-[global]
-    ### Display ###
-
-    # Which monitor should the notifications be displayed on.
-    monitor = 0
-
-    # Display notification on focused monitor.  Possible modes are:
-    #   mouse: follow mouse pointer
-    #   keyboard: follow window with keyboard focus
-    #   none: don't follow anything
-    #
-    # "keyboard" needs a window manager that exports the
-    # _NET_ACTIVE_WINDOW property.
-    # This should be the case for almost all modern window managers.
-    #
-    # If this option is set to mouse or keyboard, the monitor option
-    # will be ignored.
-    follow = mouse
-
-    # The geometry of the window:
-    #   [{width}]x{height}[+/-{x}+/-{y}]
-    # The geometry of the message window.
-    # The height is measured in number of notifications everything else
-    # in pixels.  If the width is omitted but the height is given
-    # ("-geometry x2"), the message window expands over the whole screen
-    # (dmenu-like).  If width is 0, the window expands to the longest
-    # message displayed.  A positive x is measured from the left, a
-    # negative from the right side of the screen.  Y is measured from
-    # the top and down respectively.
-    # The width can be negative.  In this case the actual width is the
-    # screen width minus the width defined in within the geometry option.
-    geometry = "300x100-15+46"
-
-    # Show how many messages are currently hidden (because of geometry).
-    indicate_hidden = yes
-
-    # Shrink window if it's smaller than the width.  Will be ignored if
-    # width is 0.
-    shrink = yes
-
-    # The transparency of the window.  Range: [0; 100].
-    # This option will only work if a compositing window manager is
-    # present (e.g. xcompmgr, compiz, etc.).
-    transparency = 0
-
-    # The height of the entire notification.  If the height is smaller
-    # than the font height and padding combined, it will be raised
-    # to the font height and padding.
-    notification_height = 0
-
-    # Draw a line of "separator_height" pixel height between two
-    # notifications.
-    # Set to 0 to disable.
-    separator_height = 2
-
-    # Padding between text and separator.
-    padding = 8
-
-    # Horizontal padding.
-    horizontal_padding = 8
-
-    # Defines width in pixels of frame around the notification window.
-    # Set to 0 to disable.
-    frame_width = 2
-
-    # Defines color of the frame around the notification window.
-    frame_color = "#000000"
-
-    # Define a color for the separator.
-    # possible values are:
-    #  * auto: dunst tries to find a color fitting to the background;
-    #  * foreground: use the same color as the foreground;
-    #  * frame: use the same color as the frame;
-    #  * anything else will be interpreted as a X color.
-    separator_color = frame
-
-    # Sort messages by urgency.
-    sort = yes
-
-    # Don't remove messages, if the user is idle (no mouse or keyboard input)
-    # for longer than idle_threshold seconds.
-    # Set to 0 to disable.
-    # A client can set the 'transient' hint to bypass this. See the rules
-    # section for how to disable this if necessary
-    idle_threshold = 120
-
-    ### Text ###
-
-    font = Museo Sans 10
-
-    # The spacing between lines.  If the height is smaller than the
-    # font height, it will get raised to the font height.
-    line_height = 0
-
-    # Possible values are:
-    # full: Allow a small subset of html markup in notifications:
-    #        <b>bold</b>
-    #        <i>italic</i>
-    #        <s>strikethrough</s>
-    #        <u>underline</u>
-    #
-    #        For a complete reference see
-    #        <http://developer.gnome.org/pango/stable/PangoMarkupFormat.html>.
-    #
-    # strip: This setting is provided for compatibility with some broken
-    #        clients that send markup even though it's not enabled on the
-    #        server. Dunst will try to strip the markup but the parsing is
-    #        simplistic so using this option outside of matching rules for
-    #        specific applications *IS GREATLY DISCOURAGED*.
-    #
-    # no:    Disable markup parsing, incoming notifications will be treated as
-    #        plain text. Dunst will not advertise that it has the body-markup
-    #        capability if this is set as a global setting.
-    #
-    # It's important to note that markup inside the format option will be parsed
-    # regardless of what this is set to.
-    markup = full
-
-    # The format of the message.  Possible variables are:
-    #   %a  appname
-    #   %s  summary
-    #   %b  body
-    #   %i  iconname (including its path)
-    #   %I  iconname (without its path)
-    #   %p  progress value if set ([  0%] to [100%]) or nothing
-    #   %n  progress value if set without any extra characters
-    #   %%  Literal %
-    # Markup is allowed
-    format = "<b>%s</b>\n%b"
-
-    # Alignment of message text.
-    # Possible values are "left", "center" and "right".
-    alignment = center
-
-    # Show age of message if message is older than show_age_threshold
-    # seconds.
-    # Set to -1 to disable.
-    show_age_threshold = 60
-
-    # Split notifications into multiple lines if they don't fit into
-    # geometry.
-    word_wrap = yes
-
-    # When word_wrap is set to no, specify where to make an ellipsis in long lines.
-    # Possible values are "start", "middle" and "end".
-    ellipsize = middle
-
-    # Ignore newlines '\n' in notifications.
-    ignore_newline = no
-
-    # Stack together notifications with the same content
-    stack_duplicates = true
-
-    # Hide the count of stacked notifications with the same content
-    hide_duplicate_count = false
-
-    # Display indicators for URLs (U) and actions (A).
-    show_indicators = yes
-
-    ### Icons ###
-
-    # Align icons left/right/off
-    icon_position = left
-
-    # Scale larger icons down to this size, set to 0 to disable
-    max_icon_size = 32
-
-    # Paths to default icons.
-    icon_path = /usr/share/icons/candy-icons/apps/scalable:/usr/share/icons/candy-icons/devices/scalable/
-
-    ### History ###
-
-    # Should a notification popped up from history be sticky or timeout
-    # as if it would normally do.
-    sticky_history = yes
-
-    # Maximum amount of notifications kept in history
-    history_length = 20
-
-    ### Misc/Advanced ###
-
-    # dmenu path.
-    dmenu = /usr/bin/rofi -dmenu
-
-    # Browser for opening urls in context menu.
-    browser = /usr/bin/firefox -new-tab
-
-    # Always run rule-defined scripts, even if the notification is suppressed
-    always_run_script = true
-
-    # Define the title of the windows spawned by dunst
-    title = Dunst
-
-    # Define the class of the windows spawned by dunst
-    class = Dunst
-
-    # Print a notification on startup.
-    # This is mainly for error detection, since dbus (re-)starts dunst
-    # automatically after a crash.
-    startup_notification = false
-
-    # Manage dunst's desire for talking
-    # Can be one of the following values:
-    #  crit: Critical features. Dunst aborts
-    #  warn: Only non-fatal warnings
-    #  mesg: Important Messages
-    #  info: all unimportant stuff
-    # debug: all less than unimportant stuff
-    verbosity = mesg
-
-    # Define the corner radius of the notification window
-    # in pixel size. If the radius is 0, you have no rounded
-    # corners.
-    # The radius will be automatically lowered if it exceeds half of the
-    # notification height to avoid clipping text and/or icons.
-    corner_radius = 0
-
-    ### Legacy
-
-    # Use the Xinerama extension instead of RandR for multi-monitor support.
-    # This setting is provided for compatibility with older nVidia drivers that
-    # do not support RandR and using it on systems that support RandR is highly
-    # discouraged.
-    #
-    # By enabling this setting dunst will not be able to detect when a monitor
-    # is connected or disconnected which might break follow mode if the screen
-    # layout changes.
-    force_xinerama = false
-
-    ### mouse
-
-    # Defines action of mouse event
-    # Possible values are:
-    # * none: Don't do anything.
-    # * do_action: If the notification has exactly one action, or one is marked as default,
-    #              invoke it. If there are multiple and no default, open the context menu.
-    # * close_current: Close current notification.
-    # * close_all: Close all notifications.
-    mouse_left_click = close_current
-    mouse_middle_click = do_action
-    mouse_right_click = close_all
-
-# Experimental features that may or may not work correctly. Do not expect them
-# to have a consistent behaviour across releases.
-[experimental]
-    # Calculate the dpi to use on a per-monitor basis.
-    # If this setting is enabled the Xft.dpi value will be ignored and instead
-    # dunst will attempt to calculate an appropriate dpi value for each monitor
-    # using the resolution and physical size. This might be useful in setups
-    # where there are multiple screens with very different dpi values.
-    per_monitor_dpi = false
-
-[shortcuts]
-
-    # Shortcuts are specified as [modifier+][modifier+]...key
-    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
-    # "mod3" and "mod4" (windows-key).
-    # Xev might be helpful to find names for keys.
-
-    # Close notification.
-    close = ctrl+space
-
-    # Close all notifications.
-    close_all = ctrl+shift+space
-
-    # Redisplay last message(s).
-    # On the US keyboard layout "grave" is normally above TAB and left
-    # of "1". Make sure this key actually exists on your keyboard layout,
-    # e.g. check output of 'xmodmap -pke'
-    history = ctrl+grave
-
-    # Context menu.
-    context = ctrl+shift+grave
-
-[urgency_low]
-    # IMPORTANT: colors have to be defined in quotation marks.
-    # Otherwise the "#" and following would be interpreted as a comment.
-    background = "#ebdbb2"
-    foreground = "#282828"
-    frame_color = "#b8bb26"
-    timeout = 7
-    # Icon for notifications with low urgency, uncomment to enable
-    icon = /home/javalsai/.config/dunst/images/notification-low.png
-
-[urgency_normal]
-    foreground = "#ebdbb2"
-    background = "#282828"
-    frame_color = "#458588"
-    timeout = 10
-    # Icon for notifications with normal urgency, uncomment to enable
-    icon = /home/javalsai/.config/dunst/images/notification.png
-
-[urgency_critical]
-    foreground = "#ebdbb2"
-    background = "#282828"
-    frame_color = "#fb4934"
-    timeout = 15
-    # Icon for notifications with critical urgency, uncomment to enable
-    icon = /home/javalsai/.config/dunst/images/notification-critical.png
-
-# Every section that isn't one of the above is interpreted as a rules to
-# override settings for certain messages.
-#
-# Messages can be matched by
-#    appname (discouraged, see desktop_entry)
-#    body
-#    category
-#    desktop_entry
-#    icon
-#    match_transient
-#    msg_urgency
-#    stack_tag
-#    summary
-#
-# and you can override the
-#    background
-#    foreground
-#    format
-#    frame_color
-#    fullscreen
-#    new_icon
-#    set_stack_tag
-#    set_transient
-#    timeout
-#    urgency
-#
-# Shell-like globbing will get expanded.
-#
-# Instead of the appname filter, it's recommended to use the desktop_entry filter.
-# GLib based applications export their desktop-entry name. In comparison to the appname,
-# the desktop-entry won't get localized.
-#
-# SCRIPTING
-# You can specify a script that gets run when the rule matches by
-# setting the "script" option.
-# The script will be called as follows:
-#   script appname summary body icon urgency
-# where urgency can be "LOW", "NORMAL" or "CRITICAL".
-#
-# NOTE: if you don't want a notification to be displayed, set the format
-# to "".
-# NOTE: It might be helpful to run dunst -print in a terminal in order
-# to find fitting options for rules.
-
-# Disable the transient hint so that idle_threshold cannot be bypassed from the
-# client
-#[transient_disable]
-#    match_transient = yes
-#    set_transient = no
-#
-# Make the handling of transient notifications more strict by making them not
-# be placed in history.
-#[transient_history_ignore]
-#    match_transient = yes
-#    history_ignore = yes
-
-# fullscreen values
-# show: show the notifications, regardless if there is a fullscreen window opened
-# delay: displays the new notification, if there is no fullscreen window active
-#        If the notification is already drawn, it won't get undrawn.
-# pushback: same as delay, but when switching into fullscreen, the notification will get
-#           withdrawn from screen again and will get delayed like a new notification
-#[fullscreen_delay_everything]
-#    fullscreen = delay
-#[fullscreen_show_critical]
-#    msg_urgency = critical
-#    fullscreen = show
-
-#[espeak]
-#    summary = "*"
-#    script = dunst_espeak.sh
-
-#[script-test]
-#    summary = "*script*"
-#    script = dunst_test.sh
-
-#[ignore]
-#    # This notification will not be displayed
-#    summary = "foobar"
-#    format = ""
-
-#[history-ignore]
-#    # This notification will not be saved in history
-#    summary = "foobar"
-#    history_ignore = yes
-
-#[skip-display]
-#    # This notification will not be displayed, but will be included in the history
-#    summary = "foobar"
-#    skip_display = yes
-
-#[signed_on]
-#    appname = Pidgin
-#    summary = "*signed on*"
-#    urgency = low
-#
-#[signed_off]
-#    appname = Pidgin
-#    summary = *signed off*
-#    urgency = low
-#
-#[says]
-#    appname = Pidgin
-#    summary = *says*
-#    urgency = critical
-#
-#[twitter]
-#    appname = Pidgin
-#    summary = *twitter.com*
-#    urgency = normal
-#
-#[stack-volumes]
-#    appname = "some_volume_notifiers"
-#    set_stack_tag = "volume"
-#
-# vim: ft=cfg

.config/fastfetch/config.jsonc

@@ -1,78 +0,0 @@
-//   _____ _____ _____ _____ _____ _____ _____ _____ _____ 
-//  |   __|  _  |   __|_   _|   __|   __|_   _|     |  |  |
-//  |   __|     |__   | | | |   __|   __| | | |   --|     |
-//  |__|  |__|__|_____| |_| |__|  |_____| |_| |_____|__|__|  ARCH  
-//
-//  by Bina
-
-
-// execute with: fastfetch --colors-block-range-start 9 --colors-block-width 3
-
-{
-    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
-    "logo": {
-        "source": "~/pictures/pfp.png",
-	"width": 20,
-	"height": 10,
-        "padding": {
-            "top": 1,
-            "right": 0
-        }
-    },
-    "display": {
-        "separator": " "
-    },
-    "modules": [
-	{
-		"type": "colors",
-		"key": " ",
-		"symbol": "circle"
-	},
-	"break",
-	{
-            "type": "title",
-            "keyWidth": 10
-        },
-        {
-            "type": "os",
-            "key": " ",
-            "keyColor": "33",  // = color3
-        },
-        {
-            "type": "kernel",
-            "key": " ",
-            "keyColor": "33",
-        },
-        {
-            "type": "shell",
-            "key": " ",
-            "keyColor": "33", 
-        },
-        {
-            "type": "terminal",
-            "key": " ",
-            "keyColor": "33", 
-        },
-        {
-            "type": "wm",
-            "key": " ",
-            "keyColor": "33", 
-        },
-        {
-            "type": "uptime",
-            "key": " ",
-            "keyColor": "33", 
-        },
-        {
-            "type": "media",
-            "key": "󰝚 ",
-            "keyColor": "33", 
-        },
-        "break",
-	{
-		"type": "colors",
-		"key": " ",
-		"symbol": "circle"
-	},
-    ]
-}

.config/fish/conf.d/abbreviations.fish

@@ -1,8 +0,0 @@
-abbr ssh "kitten ssh"
-abbr push "git push"
-abbr --set-cursor=! commit "git commit -m \"!\""
-abbr add "git add ."
-abbr vim "vim -N"
-abbr in "sudo zypper in"
-abbr up "sudo zypper up"
-abbr ls "ls -t"

.config/fish/config.fish

@@ -1,7 +0,0 @@
-if status is-interactive
-    # Commands to run in interactive sessions can go here
-end
-set -U fish_greeting
-function fish_greeting
-	fastfetch
-end

.config/fish/fish_variables

@@ -1,33 +0,0 @@
-# This file contains fish universal variable definitions.
-# VERSION: 3.0
-SETUVAR __fish_initialized:3400
-SETUVAR fish_color_autosuggestion:brblack
-SETUVAR fish_color_cancel:\x2dr
-SETUVAR fish_color_command:blue
-SETUVAR fish_color_comment:red
-SETUVAR fish_color_cwd:green
-SETUVAR fish_color_cwd_root:red
-SETUVAR fish_color_end:green
-SETUVAR fish_color_error:brred
-SETUVAR fish_color_escape:brcyan
-SETUVAR fish_color_history_current:\x2d\x2dbold
-SETUVAR fish_color_host:normal
-SETUVAR fish_color_host_remote:yellow
-SETUVAR fish_color_normal:normal
-SETUVAR fish_color_operator:brcyan
-SETUVAR fish_color_param:cyan
-SETUVAR fish_color_quote:yellow
-SETUVAR fish_color_redirection:cyan\x1e\x2d\x2dbold
-SETUVAR fish_color_search_match:bryellow\x1e\x2d\x2dbackground\x3dbrblack
-SETUVAR fish_color_selection:white\x1e\x2d\x2dbold\x1e\x2d\x2dbackground\x3dbrblack
-SETUVAR fish_color_status:red
-SETUVAR fish_color_user:brgreen
-SETUVAR fish_color_valid_path:\x2d\x2dunderline
-SETUVAR fish_greeting:\x1d
-SETUVAR fish_key_bindings:fish_default_key_bindings
-SETUVAR fish_pager_color_completion:normal
-SETUVAR fish_pager_color_description:yellow\x1e\x2di
-SETUVAR fish_pager_color_prefix:normal\x1e\x2d\x2dbold\x1e\x2d\x2dunderline
-SETUVAR fish_pager_color_progress:brwhite\x1e\x2d\x2dbackground\x3dcyan
-SETUVAR fish_pager_color_selected_background:\x2dr
-SETUVAR fish_user_paths:/home/deadvey/bin

.config/hypr/hypridle.conf

@@ -1,8 +0,0 @@
-general {
-    lock_cmd = pidof hyprlock || hyprlock
-
-listener {
-    timeout = 15                                # 2.5min.
-    on-timeout = loginctl lock-session         # set monitor backlight to minimum, avoid 0 on OLED monitor.
-}
-

.config/hypr/hyprland.conf

@@ -1,76 +1,37 @@
 exec-once="hyprpaper"
-exec-once="waybar"
-exec-once="dunst"
-
-env = XCURSOR_SIZE,24
-env = HYPRCURSOR_SIZE,24
 
 decoration {
-	rounding = 15
+	rounding = 0
-
-	shadow {
-		range = 0
-		render_power = 1
-		color = rgba(282828ff)
-		color_inactive = rgba(000000ff)
-		offset = 0, 0
 }
-
-	blur {
-		enabled = true
-		size = 3
-		passes = 2
-	}
-}
-
-misc {
-    disable_hyprland_logo = true
-    disable_splash_rendering = true
-}
-
 general {
 	col.active_border = rgb(b8bb26)
 	col.inactive_border = rgb(282828)
 	border_size = 2
 	gaps_in = 10
 	gaps_out = 20
-	layout = master
 }
-
-master { 
-	new_on_top = true
-	new_status = "master"
-}
-
 input {
 	kb_layout = gb
 }
-bind = SUPER, Q, exec, kitty
+bind = SUPER, Q, exec, kitty --hold fastfetch
 bind = SUPER, C, killactive,
 bind = SUPER, M, fullscreen, 1
-bind = SUPER SHIFT, M, fullscreen,
 bind = SUPER, V, togglefloating,
 bind = SUPER, Space, exec, fuzzel
-bind = SUPER, P, exec, ~/bin/screenshot
+bind = SUPER, P, exec, ~/bin/screenshot-w
+bind = SUPER, J, togglesplit, # dwindle
 bind = SUPER SHIFT, up, exec, pactl set-sink-volume 0 +5%
 bind = SUPER SHIFT, down, exec, pactl set-sink-volume 0 -5%
-bind = SUPER, O, exec, hyprlock
+bind = SUPER, F, fullscreen,
+bind = SUPER, L, exec, hyprlock
 bind = SUPER SHIFT, E, exit
 bind = SUPER SHIFT, F, exec, pcmanfm 
 
 # Move focus with mainMod + arrow keys
-bind = SUPER, h, movefocus, l
+bind = SUPER, left, movefocus, l
-bind = SUPER, l, movefocus, r
+bind = SUPER, right, movefocus, r
-bind = SUPER, k, layoutmsg, cycleprev
+bind = SUPER, up, movefocus, u
-bind = SUPER, j, layoutmsg, cyclenext
+bind = SUPER, down, movefocus, d
-
-bind = SUPER SHIFT, k, layoutmsg, swapprev
-bind = SUPER SHIFT, j, layoutmsg, swapnext
-
-bind = SUPER ALT, h, resizeactive, 15 0
-bind = SUPER ALT, l, resizeactive, -15 0
-bind = SUPER ALT, k, resizeactive, 0 -15
-bind = SUPER ALT, j, resizeactive, 0 15
 
 # Switch workspaces with mainMod + [0-9]
 bind = SUPER, 1, workspace, 1
@@ -99,23 +60,3 @@ bind = SUPER SHIFT, 0, movetoworkspace, 10
 # Mouse binds
 bindm = SUPER, mouse:272, movewindow
 bindm = SUPER, mouse:273, resizewindow
-
-# Media playback
-bindle =      , XF86AudioRaiseVolume, exec, amixer -q set Master 5%+
-bindle = SHIFT, XF86AudioRaiseVolume, exec, amixer -q set Master 2%+
-bindle = CTRL , XF86AudioRaiseVolume, exec, amixer -q set Master 15%+
-bindle =      , XF86AudioLowerVolume, exec, amixer -q set Master 5%-
-bindle = SHIFT, XF86AudioLowerVolume, exec, amixer -q set Master 2%-
-bindle = CTRL , XF86AudioLowerVolume, exec, amixer -q set Master 15%-
-bindl  =      , XF86AudioMute       , exec, amixer set Master toggle
-bind   =      , XF86AudioStop       , exec, playerctl stop
-bind   =      , XF86AudioPlay       , exec, playerctl play-pause
-bind   =      , XF86AudioPrev       , exec, playerctl previous
-binde  = SHIFT, XF86AudioPrev       , exec, playerctl position  1.5-
-binde  = CTRL , XF86AudioPrev       , exec, playerctl position  7.5-
-bind   =      , XF86AudioNext       , exec, playerctl next
-binde  = SHIFT, XF86AudioNext       , exec, playerctl position  1.5+
-binde  = CTRL , XF86AudioNext       , exec, playerctl position  7.5+
-
-# Window rules
-windowrule = float, mpv

.config/hypr/hyprlock.conf

@@ -1,111 +0,0 @@
-background {
-    monitor =
-    path = screenshot
-    blur_passes = 2
-    blur_size = 10
-}
-
-background {
-    monitor =
-    color = rgba(0, 0, 0, 0.4)
-}
-
-
-image {
-    # monitor = DP-1
-    path = $HOME/pictures/pfp.png
-    size = 220
-    rounding = -1
-    border_size = 4
-    border_color = rgb(184, 187, 38)
-    position = 0, 150
-    halign = center
-    valign = center
-}
-
-label {
-    monitor =
-    text = $USER
-    text_align = center
-    color = rgba(200, 200, 200, 1.0)
-    font_size = 35
-    font_family = Noto Sans
-    rotate = 0
-
-    position = 0, 0
-    halign = center
-    valign = center
-}
-
-label {
-    monitor =
-    text = cmd[update:500] date +%H:%M:%S
-    text_align = center
-    color = rgba(200, 200, 200, 1.0)
-    font_size = 20
-    font_family = Noto Sans
-    rotate = 0
-
-    position = 30, 30
-    halign = left
-    valign = bottom
-}
-label {
-    monitor =
-    text = cmd[update:500] num=5; echo $num; num=$num-1
-    text_align = center
-    color = rgba(200, 200, 200, 1.0)
-    font_size = 20
-    font_family = Noto Sans
-    rotate = 0
-
-    position = 30, -30
-    halign = left
-    valign = top
-}
-
-label {
-    monitor =
-    text = cmd[update:10000] uptime -p
-    text_align = center
-    color = rgba(200, 200, 200, 1.0)
-    font_size = 20
-    font_family = Noto Sans
-    rotate = 0
-
-    position = -30, 30
-    halign = right
-    valign = bottom
-}
-
-input-field {
-    monitor =
-    size = 240, 50
-    outline_thickness = 2
-    dots_size = 0.2
-    dots_spacing = 0.2
-    dots_center = false
-    dots_rounding = -1
-    outer_color = rgb(184, 187, 38)
-    inner_color = rgb(40, 40, 40)
-    font_color = rgb(200, 200, 200)
-    fade_on_empty = true
-    fade_timeout = 5000
-    placeholder_text = <i>password</i>
-    hide_input = false
-    rounding = -1
-    check_color = rgb(204, 136, 34)
-    fail_color = rgb(204, 34, 34)
-    fail_text = <i>$FAIL <b>($ATTEMPTS)</b></i>
-    fail_timeout = 2000
-    fail_transition = 300
-    capslock_color = -1
-    numlock_color = -1
-    bothlock_color = -1
-    invert_numlock = false
-    swap_font_color = false
-
-    position = 0, -80
-    halign = center
-    valign = center
-}

.config/newsboat/urls

@@ -6,7 +6,6 @@ http://sdomi.pl/weblog/atom/
 https://feeds.fireside.fm/thelinuxcast/rss
 https://www.cyberciti.com/feed/
 https://www.cyberciti.com/atom/atom.xml
-https://weeklyosm.eu/rss
 -----------Comics-------------
 https://explosm.net/rss.xml
 https://onegianthand.com/rss
@@ -16,5 +15,4 @@ https://loadingartist.com/index.xml
 https://warandpeas.com/rss
 https://www.oglaf.com/feeds/rss/
 https://xkcd.com/rss.xml
-https://pcweenies.com/rss
 

.config/waybar/config

@@ -2,29 +2,15 @@
 	{
 		"layer": "top",
 		"height": 30,
-		"modules-left": ["hyprland/workspaces", "custom/temperature", "cpu", "memory"],
+		"modules-left": ["hyprland/workspaces", "custom/lock", "custom/shutdown", "custom/reboot", "custom/temperature", "cpu", "memory"],
 		"modules-center": ["custom/time", "hyprland/window"],
-		"modules-right": ["custom/server-cava", "clock", "tray"],
+		"modules-right": ["custom/metar", "battery", "clock"],
-		"hyprland/workspaces": {
-			"disable-scroll": true,
-			"show-special": true,
-			"all-outputs": true,
-			"move-to-monitor": true,
-			"wrap-on-scroll": false,
-			"format": "{icon}{name}",
-			"format-active": "[{name}]",
-			"format-icons": {
-				"urgent": "!",
-				"active": "*",
-				"default": ""
-			}
-		},
 		"clock": {
 			"format": "{:%a, %d %b %Y %H:%M:%S}",
-			"interval": 1
+			"inverval": 1
 		},
 		"custom/temperature": {
-			"format": "{} ",
+			"format": " {}",
 			"exec": "sensors | grep 'Tctl:' | sed -E 's/Tctl:[ ]+//' | sed -E 's/[ ]+//'",
 			"interval": 1,
 		},
@@ -32,7 +18,7 @@
 			"format": "{}% "
 		},
 		"memory": {
-			"format": "{}% "
+			"format": "{}% "
 		},
 		"custom/time": {
 			"exec": "bash $HOME/scripts/time.sh --hex",
@@ -50,11 +36,6 @@
 		"custom/reboot": {
 			"on-click": "reboot",
 			"format": "",
-		},
+		}
-		"custom/server-cava": {
-			"exec": "ssh max@192.168.1.193 bash /home/max/caway.sh",
-			"format": "{}",
-			"interval": 1,
-		},
 	}
 ]

.config/waybar/scripts/waymedia

@@ -1,61 +0,0 @@
-#!/usr/bin/env python3
-
-import os
-import json
-from os.path import expanduser
-import subprocess
-import re
-
-config_path = f"{expanduser('~')}/.config/waybar"
-
-if os.path.exists(f"{config_path}/config.jsonc"):
-    config_path = f"{config_path}/config.jsonc"
-else:
-    config_path = f"{config_path}/config"
-
-def remove_comments(jsonc_str):
-    json_str = re.sub(r'//.*', '', jsonc_str)  # remove single-line comments
-    json_str = re.sub(r'/\*.*?\*/', '', json_str, flags=re.DOTALL)  # remove multi-line comments
-    return json_str
-
-with open(config_path, "r", encoding="utf-8") as file:
-    jsonc_content = file.read()
-
-clean_json_str = remove_comments(jsonc_content)
-config_json = json.loads(clean_json_str)
-
-module_configs = config_json.get("custom/waymedia", {})
-pause_icon = module_configs.get("pause-icon", "   ")
-play_icon = module_configs.get("play-icon", "   ")
-divider = module_configs.get("divider", " - ")
-format = module_configs.get("format", "{icon}{artist}{divider}{title}")
-limit = module_configs.get("limit", 60)
-
-def get_command_result(command) -> str:
-    return subprocess.run(command, shell=True, capture_output=True, text=True).stdout.strip()
-
-metadata = get_command_result("playerctl metadata") 
-
-players = subprocess.run("playerctl --list-all", shell=True, capture_output=True, text=True).stdout.split("\n")
-
-for player in players:
-    status = get_command_result(f"playerctl status -p {player}")
-
-    if status != "Stopped" and status != "":
-        icon = play_icon if status == "Paused" else pause_icon
-        artist = get_command_result("playerctl metadata --format '{{artist}}'")
-        title = get_command_result("playerctl metadata --format '{{title}}'")
-        
-        if len(artist) == 0:
-            divider = ""
-
-        text = format.replace("{icon}", icon).replace("{title}", title).replace("{divider}", divider).replace("{artist}", artist).strip().replace("&", "&").replace("{}", "")
-
-        if len(text) > limit:
-            text = f"{text[:limit - 3]}..."
-            
-        print(text, flush=True)
-        exit(0)
-
-print("", flush=True)
-exit(0)

.config/waybar/scripts/waymedia-buttons

@@ -1,58 +0,0 @@
-#!/usr/bin/env python3
-
-import os
-import json
-from os.path import expanduser
-import subprocess
-import re
-
-config_path = f"{expanduser("~")}/.config/waybar"
-
-if os.path.exists(f"{config_path}/config.jsonc"):
-    config_path = f"{config_path}/config.jsonc"
-else:
-    config_path = f"{config_path}/config"
-
-def remove_comments(jsonc_str):
-    json_str = re.sub(r'//.*', '', jsonc_str)  # remove single-line comments
-    json_str = re.sub(r'/\*.*?\*/', '', json_str, flags=re.DOTALL)  # remove multi-line comments
-    return json_str
-
-with open(config_path, "r", encoding="utf-8") as file:
-    jsonc_content = file.read()
-
-clean_json_str = remove_comments(jsonc_content)
-config_json = json.loads(clean_json_str)
-
-
-module_configs = config_json.get("custom/waymedia-buttons", {})
-play_icon = module_configs.get("play-icon") if "play-icon" in module_configs else "  "
-pause_icon = module_configs.get("pause-icon") if "pause-icon" in module_configs else "  "
-skip_icon = module_configs.get("skip-icon") if "skip-icon" in module_configs else " 󰒭 "
-previous_icon = module_configs.get("previous-icon") if "previous-icon" in module_configs else " 󰒮 "
-
-def get_command_result(command)-> str:
-    return subprocess.run(command, shell=True, capture_output=True, text=True).stdout.strip()
-
-metadata = get_command_result("playerctl metadata") 
-
-players = subprocess.run("playerctl --list-all", shell=True, capture_output=True, text=True).stdout.split("\n")
-
-for player in players:
-    status = get_command_result(f"playerctl status -p {player}")
-
-    if status != "Stopped" and status != "":
-        icon = play_icon if status == "Paused" else pause_icon
-        artist = get_command_result("playerctl metadata --format '{{artist}}'")
-        title = get_command_result("playerctl metadata --format '{{title}}'")
-        
-        
-        if len(artist) == 0:
-            divider = ""
-
-
-        print(f"{previous_icon} {icon} {skip_icon}", flush=True)
-        exit(0)
-
-print("", flush=True)
-exit(0)   

.config/waybar/style.css

@@ -2,7 +2,7 @@ window#waybar.screenBorder {
 	border: 2px solid #b8bb26;
 	background-color: transparent;
 	box-shadow: 0px 0px 0px 60px black, 0px 0px 0px 0.5px #ebdbb2;
-	border-radius: 10px;
+	border-radius: 0px;
 	margin: 20px;
 }
 window#waybar.top,
@@ -14,6 +14,7 @@ window#waybar.left {
 #workspaces button {
 	padding: 0px;
 	color: #ebdbb2;
+	background: #282828;
 }
 #workspaces button:hover {
 	color: #b8bb26;
@@ -25,31 +26,60 @@ window#waybar.left {
 	color: #282828;
 	background: #ebdbb2;
 }
-#workspaces,
+#workspaces {
+	border: 2px solid #b8bb26;
+	border-radius: 0;
+	box-shadow: 12px 12px 0px 2px #000000;
+	padding: 0px;
+	margin: 6px;
+	padding: 0px 5px 0px 5px;
+	background: #282828;
+}
+#custom-caway {
+	color: #ebdbb2;
+	background: #282828;
+	border: 2px solid #b8bb26;
+	border-radius: 0;
+	box-shadow: 12px 12px 0px 2px #000000;
+	margin: 6px;
+}
 #custom-clock,
 #clock,
 #custom-time,
 #network,
+#custom-weather,
+#custom-browser,
+#custom-terminal,
+#custom-anki,
+#custom-keepassxc,
+#custom-gimp,
+#custom-writer,
+#custom-luanti,
+#custom-nixpkgs,
+#custom-email,
+#custom-irc,
 #disk,
 #memory,
 #cpu,
+#custom-website,
 #pulseaudio,
 #custom-metar,
 #custom-uptime,
+#custom-temperature,
+#custom-fuzzy-time,
 #custom-cmus-artist,
 #custom-cmus-song,
 #custom-playerctl,
 #custom-cava-waybar-local,
-#window,
+#custom-lock,
-#custom-temperature,
+#custom-shutdown,
-#tray,
+#custom-reboot,
-#custom-server-cava {
+#window {
 	color: #ebdbb2;
 	background: #282828;
 	border: 2px solid #b8bb26;
-	border-radius: 15;
+	border-radius: 0;
-	/*box-shadow: 12px 12px 0px 2px #282828;*/
+	box-shadow: 12px 12px 0px 2px #000000;
-	padding-left: 3px;
+	padding: 3px;
-	padding-right: 3px;
 	margin: 6px;
 }

.gitignore

@@ -1 +0,0 @@
-/.themes

.irssi/config

@@ -13,8 +13,8 @@ chatnets = {
 		type = "IRC";
 		nick = "deadvey";
 		alternate_nick = "deadlydave";
-  };
+	}
-};
+}
 channels = (
   { name = "#d_general";        chatnet = "tuxcord";      autojoin = "yes"; },
   { name = "#d_off-topic";      chatnet = "tuxcord";      autojoin = "yes"; },
@@ -24,12 +24,5 @@ channels = (
   { name = "#d_memes";          chatnet = "tuxcord";      autojoin = "yes"; },
   { name = "#d_counting";       chatnet = "tuxcord";      autojoin = "yes"; },
   { name = "#d_computers";      chatnet = "tuxcord";      autojoin = "yes"; },
-  { name = "#d_projects"; chatnet = "tuxcord"; autojoin = "yes"; }
+  { name = "#d_projects";       chatnet = "tuxcord";      autojoin = "yes"; },
 );
-settings = {
-  core = { 
-    real_name = "deadvey";
-    user_name = "deadvey";
-    nick = "deadvey";
-  };
-};

.irssi/otr/otr.instag

@@ -1,2 +0,0 @@
-# WARNING! You shouldn't copy this file to another computer. It is unnecessary and can cause problems.
-tuxcord	IRC	26040c9c

.themes/Gruvbox-Dark-hdpi/xfwm4/themerc

@@ -0,0 +1,23 @@
+button_offset=9
+button_spacing=0
+
+show_app_icon=false
+
+full_width_title=true
+
+title_shadow_active=false
+title_shadow_inactive=false
+
+title_horizontal_offset=3
+
+active_text_color=#f0f7fe
+active_text_shadow_color=#222426
+
+inactive_text_color=#999da3
+inactive_text_shadow_color=#222426
+
+shadow_delta_height=2
+shadow_delta_width=0
+shadow_delta_x=0
+shadow_delta_y=-5
+shadow_opacity=40